How to Configure PPTP Mobile User VPN Client on Windows 7 System

Configuration

1. Go to “Start > Control Panel > Network and Internet > Network and Sharing Center” page, click “Set up a new connection or network”, as shown in Figure 1-1:
Figure 1-1
 
2. Select “Connect to a workplace”, click “Next”, as shown in Figure 1-2:
Figure 1-2
 
3. Select  “Use my Internet connection(VPN)”, as shown in Figure 1-3:
Figure 1-3
 
4. Set “Internet address” and “Destination name”, check on “Allow other people to use this connection” and “Don’t connect now”, then click “Next”, as shown in Figure 1-4:
Figure 1-4
 
5. Enter “User name” and “Password”, click “Create” , as shown in Figure 1-5:  
Figure 1-5
 
6. Click “Close”, as shown in Figure 1-6:  
Figure 1-6
 
7. Go back to “Network and Sharing Center” page, click “Change adapter settings”, as shown in Figure 1-7:  
Figure 1-7
 
8. Right Click “VPN Connection”, click “Properties”, as shown in Figure 1-8:  
Figure 1-8
 
9. Select “Security”, For “Data encryption”, select “Optional encryption(Connect even if no encryption)”, for “Allow these protocols”, check on related information, click “OK”, as shown in Figure 1-9:
Figure 1-9
 
10. In the pop-up window, click “Yes”, as shown in Figure 1-10:
Figure 1-10
 
11. Enter “User name” and “Password”, click “Connect” to connect PPTP VPN Server, as shown in Figure 1-11:
Figure 1-11
 
12. VPN is connected , as shown in Figure 1-12:
 
Figure 1-12