How to Configure Cloud Storage on AC650W

Introduction

This document describes the configuration steps of how to configure cloud storage on AC650W.

Prerequisites

Requirements
Share data and files via LAN Port in Intranet network.
 
Components Used
UTT Wireless Router: AC650W; Firmware Version: nvAC650Wv1.8.0-150319;

Configure

1.Go to Application -> 2 -> Cloud Storage page, as shown in Figure 1-1:
Figure 1-1
 
2.Click Cloud Storage icon, enable Cloud Storage , then click Save, as shown in Figure 1-2
Figure 1-2
 
3.Insert your USB Flash Disk On the Router.
4.Click Scan button, it will display the size of the USB Flash Disk, as shown in Figure 1-3:
Figure 1-3
 
5.Click Advanced Options, enable Allow Remote Access, and the User name and Password both are utt by default, then click Save, as shown in Figure 1-4:  
Figure 1-4
 
So far, you have finished the configuration.

Troubleshooting:

The two ways of Intranet users to access the USB Device from a windows computer:
1.Click This PC (Windows 8 for example), enter \\192.168.1.1\uttShare in the address bar, as shown in Figure 1-5, then press Enter key, next enter User name and Password (both are utt by default ) to open the shared folder, as shown in Figure 1-6:
Figure 1-5
Figure 1-6
 
2.Right Click Start menu , click Run, then enter ftp:\\192.168.1.1:21, click OK, as shown in Figure 1-7, next enter User name and Password (both are utt by default ) to open the shared folder, as shown in Figure 1-8:
Figure 1-7
Figure 1-8
<