How to Configure Separate Subnet for Wireless and Wired Users

Introduction
The office needs two subnets. One for wired devices, and the other for wireless devices. This document describes how to configure and manage multiple DHCP pool on a UTT Business Router.
 
Prerequisites
1. a UTT Business Router (hereinafter shorted as “the Router"), such as UTT router N518W, AC750W, AC750GW and AC1220GW. Firmware Version: 3.0.0 or above
2. a PC/laptop connected to the Router, either through its LAN port or wireless network
 
Configuration
1. Launch an Internet browser from the PC/laptop and enter 192.168.1.1 in the address bar. Enter the Router username and password when prompted (default username: admin, default password: admin).
 
2. Go to Network > DHCP Server, click Add
 
3. Add LAN IP and binded Interface.
 
4. Configure DHCP pool point to Gateway IP 192.168.100.1 and select Wireless SSID, click Save.
 
5. Configuration will be filled automatically after binding to Interface, then click Save
 
6. Wireless Gateway IP will be established automatically with 192.168.100.1 at LAN.