How to Reset to Factory Default Settings

Introduction
This document shows two ways to reset the router, using Web interface and reset button on the router.
 
Prerequisites
1. a UTT Business Router (hereinafter shorted as “the Router"), such as UTT router N518W, AC750W, AC750GW, AC1220GW, ER518, ER840G and ER4240G. Firmware Version: 3.0.0 or above
2. a PC/laptop connected to the Router wirelessly or through an Ethernet cable
 
Configuration
1. Reset at Web UI
Go to System Configuration > System Maintenance > Configuration, Click Reset and Confirm to restore factory default settings.
 
2. Reset button at the device
Disconnect the router from all other devices, then press and hold the Reset button for around 10 seconds until all LED lights flash together.
 
Note
It is recommended that save current configuration before the reset, steps refer to How to Import and Export Configuration on a UTT Router.